Product: ROKR Luminous Globe 3D Wooden Puzzle
SKU: ST003
Product type: 3D Wooden Puzzle
Quick answer: ROKR Luminous Globe ST003 rotates manually; connecting power switches on the light but does not provide automatic rotation. This guide covers ST003 parts identification, electronic connections, common assembly issues, and rotation or adjustment problems. For the complete manual and assembly videos, visit Assembly Guides and Manuals. For missing, broken, uncut, or visibly warped parts, use Part Replacement.
In This Guide
- Before You Troubleshoot
- Parts and Electrical Reference
- Common Assembly Problems
- Rotation and Adjustment Problems
- Need More Help?
Before You Troubleshoot
- ST003 rotates manually. Connecting the power supply switches on the light but does not make the globe rotate automatically.
- Match both ends of the electronic connectors to the reference images; the connectors can still be inserted when reversed.
- Apply wax only at the contact points shown in the troubleshooting images.
- When requesting fragile parts, include the quantity with the SKU and part number, such as
ST003-C4*5.
Parts and Electrical Reference
Which ST003 Parts Are Especially Fragile?
The fragile parts identified in the source are C4, A10, B6, and F3. When requesting replacements, include the quantity, for example ST003-C4*5.
How Should the Electronic Connectors Be Oriented?
Match both connector ends to the reference images before inserting them. The connectors can still be inserted when reversed, so confirm the direction shown in each image.
Where Can I Find the Magnifying Glass Part on the Board?
Use this image to locate the magnifying-glass part on the wooden board before assembly.
Where Can I Find Parts D2 and E3 on the Boards?
Use these images to locate D2 and E3 on their wooden boards before assembly.
Common Assembly Problems
How Should C4 or A10 Be Inserted?
Insert C4 or A10 until it sits flush.
Why Is the Circular Hole Blocking the Knob?
Cause: C10 may be reversed, which blocks the opening needed by the knob.
Solution: Compare C10 with the reference and correct its direction before fitting the knob.
Why Will the Globe Not Insert Fully onto the Base?
Check whether P8 was assembled in advance.
Rotation and Adjustment Problems
Should the Luminous Globe Rotate Automatically?
No. The standard ST003 globe is rotated manually with the knob, and the power connection operates the light.
Why Does the Small Knob Turn Without Rotating the Globe?
Check whether gears G19 and G20 are missing.
Why Is the Bottom Knob Completely Stuck?
Possible cause: Insufficient wax at one or more indicated points may create high friction.
Solution: Check the points shown in the image, disassemble the affected area, and apply wax.
Why Will the Magnifying Glass Not Move Up and Down?
Excess friction may occur between D1, A8, E2, B10, and the wooden boards. Apply wax at the points shown in the images.
Need More Help?
If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.
Robotime is a creative lifestyle company dedicated to designing and developing 3D puzzles, toys, and wooden handicrafts. Subscribe to learn more.
