Product: ROKR Tilt-A-Whirl DIY Music Box 3D Wooden Puzzle
SKU: EA04
Product type: 3D Wooden Puzzle
Quick answer: This guide provides the EA04 parts list and checks for touch-switch response, battery-box wiring, base rotation, and cup rotation problems. For the full manual and assembly resources, visit Assembly Guides and Manuals. For missing, broken, uncut, or visibly warped parts, use Part Replacement.
In This Guide
Parts Reference
EA04 Part P Reference
Functional Problems
Why Is There No Response After Touching the Switch?
Check whether the positive and negative battery terminals and the wiring at the battery-box port are correct.
Why Does the Light Flash Once and Stop?
If the light flashes once and stops each time you touch the switch, check whether the wiring at the battery-box port on the bottom is correct.
Why Doesn't the Product Rotate After the Base Is Assembled?
① Check whether components C11 and C13 are pressed fully into place.
② Check whether P20 is assembled in reverse and whether P21 is missing.
③ Check whether screw P10 on the bottom is tightened and whether screw P4 is tightened.
Why Doesn't the Assembled Cup Rotate?
① Check whether the positive and negative battery poles are correct, whether P20 is assembled, and whether the cup handles face the correct direction.
③ Check whether C8, C10, and C3 are polished and waxed, and whether F1 is polished and waxed. Check whether F2 is missing and whether C2 is polished. Check whether C2 is assembled in reverse.
Need More Help?
If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.
Robotime is a creative lifestyle company dedicated to designing and developing 3D puzzles, toys, and wooden handicrafts. Subscribe to learn more.
