Product: ROKR Vitascope Movie Projector
SKU: LK601
Product type: 3D Wooden Puzzle
Quick answer: This guide covers LK601 film specifications, loose parts during assembly, lighting, film movement, and projected-image issues. For the manual and assembly resources, visit Assembly Guides and Manuals. For missing, broken, uncut, or visibly warped parts, use Part Replacement.
In This Guide
Parts Reference
What Are the LK601 Film Specifications?
The film is 24 mm wide and 600 mm long, with 58 frames.
Each hole measures 4 × 4 mm, and the hole spacing is 6 mm.
The film uses a positive exposure process.
The image on the film measures 1.1 cm long and 0.5 cm wide.
Common Assembly Problems
Why Are the Steel Shafts Loose in Steps 2 and 3?
Most steel shafts in this model remain loose at these stages and will be secured in later steps. Temporary looseness is normal. If it makes assembly difficult, temporarily hold both sides of the steel shaft with a small piece of tape.
Why Is the Handle Loose During Assembly and Rotation?
The handle will be secured after Parts D30, D31, and D32 are assembled in Step 10.
Lighting Problems
Why Doesn't the Light Work After Assembly?
1. Rotate the handle and look from the side to check whether the motor gear rotates.
2. Make sure Part A18 is pressed in fully.
3. Check whether Part A17 is missing.
Film and Image Problems
Why Doesn't the Film Rotate?
1. Check if the bumps in Step 3 are stuck in the holes on both sides of the film.
3. Check whether Steel Shaft P5 is missing.
4. Check whether the gears are engaged.
Why Is the Projected Image Inverted or Reversed?
Check whether the film is facing the correct direction.
Why Is the Projected Image Blurry?
1. Project the image in as dark a place as possible.
2. Place the projector as close to the wall as possible.
3. Adjust the focus by gently moving the front part of the projector.
Why Is There a Black Area in the Middle of the Image?
Check whether Steel Shaft P6 is fully seated. Any part of the shaft extending beyond the bushing can block the light.
Need More Help?
If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.
Robotime is a creative lifestyle company dedicated to designing and developing 3D puzzles, toys, and wooden handicrafts. Subscribe to learn more.
