Product: ROKR Parachute Tower DIY Music Box 3D Wooden Puzzle
SKU: EA01
Product type: 3D Wooden Puzzle
Quick answer: This guide provides the EA01 parts list, shows where to tie the knot in P12, and covers checks for reversing problems and all six umbrellas moving up and down at the same time. For the full manual and assembly resources, visit Assembly Guides and Manuals. For missing, broken, uncut, or visibly warped parts, use Part Replacement.
In This Guide
Parts Reference
EA01 Part P Reference
Common Assembly Problems
Where Should the Knot Be Tied in P12?
Tie a knot in P12 at the position shown.
Functional Problems
Why Won't the Parachute Tower Reverse?
Refer to page 7 of the instructions. Use a screwdriver to hold the leaf blade so the two leaf blades touch. Then slightly bend the leaf blades to ensure that C7 rotates to the bent position, holds the leaf blade, and keeps the two leaf blades in contact. If the product still will not reverse after the two leaf blades touch, contact customer service to request replacement part P14.
Why Do All Six Umbrellas Move Up and Down at the Same Time?
① Check whether the line left here is too long. Use the auxiliary tool to measure it to 11 cm, and do not leave the line too long.
② The lines of the first three umbrellas must pass through the bottom hole. If they pass through the top hole, the lines will wrap around the center post during rotation, and one wrap will prevent them from fully reaching the top.
③ At the position shown, pass the line through the hole on the side. Do not leave it unthreaded.
④ Before assembling the first three umbrellas, screw the center pivot counterclockwise to the bottom.
Need More Help?
If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.
Robotime is a creative lifestyle company dedicated to designing and developing 3D puzzles, toys, and wooden handicrafts. Subscribe to learn more.
