How should I prepare before starting my first DIY kit?
Read through the instructions first, sort parts into small groups, and set up a clear workspace. Keep a tray for loose pieces and test-fit parts before using glue.
Read full guide
← Back to DIY Help Center
Robotime Build Help
Complete Build Guide for Robotime(ROKR, Rolife & Rowood) DIY Kits
Practical assembly guidance for 3D wooden puzzles, miniature houses, book nooks, and other Robotime DIY kits — from preparing your workspace to handling tiny parts, glue, lights, and tight wooden slots.
Start here before you glue anything.
This page gives short, beginner-friendly answers to common building questions. Each card links to a detailed guide you can create later, so customers can quickly scan the basics and continue learning when they need more help.
- Read the manual once before building.
- Dry-fit parts before using glue.
- Test lights before enclosing wires.
- Sand gently instead of forcing tight wooden pieces.
01
Getting Started
Prepare your workspace, sort parts, and build with a calmer step-by-step flow.
How can I organize parts during a long build?
Sort parts by step or sheet, keep small pieces in shallow containers, and leave labels visible. After each session, return unused parts to the same place.
Read full guide
02
Tools
Choose simple tools that make cutting, holding, sanding, and reading instructions easier.
Which basic tools are most useful for assembling a DIY kit?
A small cutter, tweezers, fine pliers, a sanding tool, and a stable work surface cover most assembly tasks. Add task-specific tools only when needed.
Read full guideWhat helpful add-on tools can make DIY kits easier?
Optional tools such as a cutting mat, ruler, book holder, magnifying goggles, tape, and painting tools can make long or detailed builds more comfortable.
Read full guide
03
Small Parts
Handle tiny or delicate pieces with more control and less stress.
How can I handle tiny or fragile parts more easily?
Use fine or reverse tweezers and avoid forcing tight pieces. Sand lightly when needed, then test-fit again before gluing.
Read full guide
04
Glue
Apply adhesive neatly and keep delicate pieces steady while they set.
What is the best way to apply glue without making a mess?
Apply a small amount with a fine applicator, test placement first, and hold the piece steady until it sets. Use less glue near visible surfaces and wires.
Read full guideHow can I hold delicate pieces steady while glue dries?
Use a temporary support that will not crush the part, apply only enough adhesive to secure the joint, and let it set before adding weight nearby.
Read full guide
05
Wiring
Plan wire routes, protect thin wires, and test lights at the right time.
How can I connect and manage wires while building?
Plan the wire path before final assembly, keep connections secure, and avoid sharply pulling thin wires. Test the circuit before closing hard-to-reach sections.
Read full guide
06
Painting
Customize parts without affecting fit, finish, or final assembly.
When should I paint or color parts during assembly?
Paint parts before they become difficult to reach, let them dry fully, and test on a hidden area first. Keep connection tabs clear so fit is not affected.
Read full guideNeed more help with your build?
If a piece is missing or cannot be repaired safely, prepare the product name, part number, and a clear photo so our support team can help faster. You can also check our assembly guide for more product-specific building support.