Product: ROKR Storm Beetle Model
SKU: MI03
Product type: 3D Metal Puzzle
Quick answer: This guide covers MI03 part identification, power and response checks, and eight checks for a stuck mechanism. For manuals and assembly resources, visit Assembly Guides and Manuals. For missing, broken, uncut, or visibly warped parts, use Part Replacement.
In This Guide
Parts Reference
Is Board D Transparent?
Yes. Board D is transparent.
Are the Screws in Bag No. 7 and Bag No. X1 the Same?
Yes. Bag No. 7 and Bag No. X1 contain the same screws.
Power and Response Problems
Why Is the ROKR Storm Beetle MI03 Not Responding?
1. Check the batteries. Do not use old batteries, and make sure the positive and negative poles are oriented correctly.
2. Check the switch by touching the switch on the bottom switch box.
3. Check the assembly direction of the base power switch, and check whether the power-switch wire is crushed.
Movement Problems
Why Is the Mechanism Stuck?
1. Check whether P13 was mistakenly used as a screw, causing the clamp to become stuck.
2. Check whether the three screws on the head are too tight.
3. Check whether Part A9 has been greased.
4. Check whether Part C6 was assembled in the reverse direction and whether P18 was used correctly.
5. Check whether the cutting points on C5 are cut cleanly.
6. Check whether P18 was mistakenly used as P19.
7. Do not press Part A8 completely to the end. This is very important.
8. Check whether the wing linkage was assembled in the reverse direction.
Need More Help?
If your issue is not covered here or the problem continues after these checks, email service@robotime.com or contact Robotime Support.
Robotime is a creative lifestyle company dedicated to designing and developing 3D puzzles, toys, and wooden handicrafts. Subscribe to learn more.
